Details

The Classic Series single head adjustable metering pump is built with three detachable components; the motor, feed rate control, and the pump head. The output is determined by three factors; the rpm of the motor gears, the percentage setting on the feed rate control, and the size of the pump tube. The motor shaft rotates at a fixed rpm, which drives the feed rate control to intermittently engage the roller assembly within the pump head according to the setting on the external dial ring. The dial ring is labeled L to 10 and has a 20:1 turndown.

Features:

• 3-point roller design assists in anti-siphon protection
• Pump head requires no valves, allows for easy maintenance
• Self-priming against maximum working pressure, foot valve not required
• Pump does not lose prime or vapor lock
• Pumps off-gassing solutions and can run dry
• Output volume is not affected by back pressure
• Easy to change pump tube; lubrication is not required
• Pump tubes and pump heads interchange between models

Specifications:

• Maximum Operating Temperature 125° F (52° C)
• Maximum Suction Lift
• 25 ft (7.6 m) vertical lift, based on water
• Motor Type 1/30 HP, shaded pole, class B
• Duty Cycle Continuous
• Motor Voltage (Amp Draw)
• 120V 60Hz 1PH (1.7)
• 220V 60Hz 1PH (0.9)
• 230V 50Hz 1PH (0.9) INTERNATIONAL
• 250V 50Hz 1PH (0.9) INTERNATIONAL
• Power Cord Type SJTOW
• Power Cord Plug End
• 120V 60Hz NEMA 5/15
• 220V 60Hz NEMA 6/15
• 230V 50Hz CEE 7/VII
• 250V 50Hz CEE 7/VII
• Pump Tube Number: #4
• Gallons Per Day: 1.7 to 35.0
• Liters Per Day: 6.4 to 132.5
• Gallons Per Hour: 0.07 to 1.46
• Liters Per Hour: 0.27 to 5.52
• Ounces Per Minute: 0.15 to 3.11
• Milliliters Per Minute: 4.44 to 92.01
• Liters Per day: 5.1 to 106.0